New firmware
Firmware Samsung SL-C480/480W/480FW (SD) V3.00.01.21fCompatible models: Samsung SL-C480, Samsung SL-C480FW, Samsung SL-C480w
Firmware HP LASER 150A/150NW (SD) V3.82.01.08f + 5 dotsCompatible models: HP LASER 150A, HP LASER 150NW
Firmware HP LASER MFP 178FNW (SD) V3.82.01.07f + 5 dotsCompatible models: HP LASER MFP 178FNW
Firmware Xerox B215 (SD) // 10 symbols 85.000.58.000f // SN + 5Compatible models: Xerox B215
Firmware Xerox B210 (SD) // 10 symbols 85.000.58.000f // SN + 5Compatible models: Xerox B210
Firmware Samsung SCX-4828FN (MD)
Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer. Remove the chip from the cartridge or seal it up. And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.
Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!!
1. Connect the printer to the computer and turn it on
2. Wait until the printer is ready for work
3. Then run the file "fix4828.bat"
4. After that file has been run, a file "FIX_SCX4828_V1.01.00.31.hd" should appear in the folder
5. Drag that file on the file icon "usbprns2.exe"
6. Wait until the device is being reprogrammed (5-10 minutes) and restarts
7. After that the reprogramming process is finished, restart the printer
8. To remove the message saying "Toner Low", you need to go to:
Menu -> System settings -> Maintenance -> Delete message toner
Attention!!
The firmware reprogramming file is not protected against any updates from the Samsung website! Do not download any updates yourself!
Firmware Samsung SCX-4828FN (MD)
Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer. Remove the chip from the cartridge or seal it up. And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.
Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!!
1. Connect the printer to the computer and turn it on
2. Wait until the printer is ready for work
3. Drag the firmware reprogramming file "FIX_SCX4828_V1.01.00.41.hd" onto the file icon “usbprns2.exe”
4. Wait until the printer reprograms (10 minute) and restarts
5. After that the reprogramming process is finished, restart the printer
6. To remove the message saying "Toner Low", you need to go to:
Menu -> System settings -> Maintenance -> Delete message toner.
Attention!!
The firmware reprogramming file is not protected against any updates from the Samsung website! Do not download any updates yourself!
Firmware Samsung SCX-4828FN (SD)
Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer. Remove the chip from the cartridge or seal it up. And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.
Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!!
1. Connect the printer to the computer and turn it on
2. Wait until the printer is ready for work
3. Run the file "download.bat"
4. The reprogramming process starts automatically
5. Wait until the printer reprograms (2-4 minute) and restarts
6. After that the reprogramming process is finished, restart the printer
Firmware Samsung SCX-4828FN (SD)
Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer. Remove the chip from the cartridge or seal it up. And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.
Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!!
1. Connect the printer to the computer and turn it on
2. Wait until the printer is ready for work
3. Run the file "download.bat"
4. The reprogramming process starts automatically
5. Wait until the printer reprograms (2-4 minute) and restarts
6. After that the reprogramming process is finished, restart the printer
Firmware Samsung SCX-4828FN (SD)
Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer. Remove the chip from the cartridge or seal it up. And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.
Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!!
1. Connect the printer to the computer and turn it on
2. Wait until the printer is ready for work
3. Run the file "download.bat"
4. The reprogramming process starts automatically
5. Wait until the printer reprograms (2-4 minute) and restarts
6. After that the reprogramming process is finished, restart the printer
Firmware Samsung SCX-4828FN (SD)
Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer. Remove the chip from the cartridge or seal it up. And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.
Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!!
1. Connect the printer to the computer and turn it on
2. Wait until the printer is ready for work
3. Run the file "download.bat"
4. The reprogramming process starts automatically
5. Wait until the printer reprograms (2-4 minute) and restarts
6. After that the reprogramming process is finished, restart the printer
Firmware Samsung SCX-4828FN (SD)
Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer.
It is very important that under no circumstances should you remove the chip from the cartridge while reprogramming the firmware. After you have succesfully reprogrammed the printer, remove the chip from the cartridge and store it somewhere safely (the chip - a key). In all cartridges which you are going to use in the printer, the chip has to be either removed or sealed. If you have accidently inserted a new cartridge without removing the chip, the device will be blocked. In order to unblock it, you can use the stored chip as a key which help you to unblock the printer.
And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.
Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!!
1. Connect the printer to the computer and turn it on
2. Wait until the printer is ready for work
3. Run the file "download.bat"
4. The reprogramming process starts automatically
5. Wait until the printer reprograms (2-4 minute) and restarts
6. After that the reprogramming process is finished, restart the printer